Aluminum Tube Production Line Technology Development

With the overall rise in China's industrial manufacturing level and equipment manufacturers for many years of continuous efforts, ‍‍aluminum tube production ‍‍line technology has been greatly improved. 150T high-speed cold extrusion machine put into operation, so that the speed of stamping tube embryo doubled, reaching 120 piece/ min or more. 

The new paint machine achieve three paint under the control of the PLC spray, so that the effect of spraying and foreign similar products quickly narrowed the gap. The widespread use of the ammonia grease roller makes the effect of the background printing significantly improved while also saving the ink, eliminating the use of blankets also save the material and save the manual. The new four-color, five-color, six-color printing machine not only increased the color, enhanced the accuracy of the suit, but also greatly improve the production speed. 

With the improvement of precision machining parts and the improvement of the robot, the accuracy of the automatic upper and lower tube is greatly improved. Breaking the limit that traditional robot minimum only in the φ16mm tube automatically up and down. 

Yingrun company achieve automatically manipulator up and down tube above φ11mm through hard work. ‍‍‍‍‍‍‍‍Capping Machine‍‍‍‍‍‍‍‍ is widely used and significantly reduce the use of artificial, improve the quality of the screw cap. In short, the production of aluminum soft tubes line has had a big leap through years of development. Not only a substantial increase in the degree of automation equipment, the quality of aluminum tubes in all aspects has also risen a few grades, significantly narrowed the gap with the import production line product quality. Saving about half of the artificial, and greatly reduce the labor intensity of the workers.